VA7010 series electric 2-way valve consists of VA7010 series valve driver and copper 2-way valve. It is used to control the opening or closing of cold water or hot water air conditioning series piping for the purpose of controlling room temperature. The driver is driven by a one-way magnetic belt synchronous motor and the valve is spring reset. Valve does not work in a normally closed state, when the need to work, the thermostat to provide an open signal, so that the electric two-way valve connected to the AC power supply and action, open the valve, chilled water or hot water into the fan coiler, to provide cold air for the room or warm air; when the room temperature reaches the thermostat set value, thermostat makes the electric two-way valve disconnect, reset the spring to make the valve closed, thus cutting off the water flow into the fan coiler. By closing or opening the valve, the room temperature is always kept within the temperature range set by the thermostat.
Product Features
VA7010 series electric two-way valve driver and valve body adopts screw connection, can be installed after the installation of the valve, and then install the driver, on-site assembly, wiring flexibility and convenience. The flat design of the driver can be installed close to the wall, taking up little space. The product is reliable and durable, with low working noise, and can work reliably in the high temperature environment that often occurs in the hidden fan coil device.
Product Parameters
Product Model | VA7010 |
Valve Body Material | Brass |
Forms of Control | Normally Closed |
Operating Voltage | AC220V |
Connection Method | Female Thread |
Nominal Pressure | ≤1.6Mpa |
Applicable Media | Cold Water, Hot Water, etc. |
Applicable Temperature | ≤95°C |
Product Size Reference
Nominal Diameter | A | B | C |
DN15 | 52 | 19.1 | 100 |
DN20 | 59 | 24 | 104.5 |
DN25 | 64 | 30.5 | 109.5 |
Product Wiring Reference
闽公网安备35058302350968号
